Products

This traditional Bolt Cutter design makes cutting steel rod simple. Features: Available in sizes 350mm and 450mm Heavy duty extended nose straps Designed for cutting concrete reinforcing rods, bolts and suspended ceiling rods

Read more less

Wallboard's traditional, heavy duty Fibro cutters Features: Cuts cement sheet up to 10mm Soft rubber grip handles 550mm long Rust resistant paint finish

Read more less

With new technology ceramic grain, the mesh pad lasts significantly longer than traditional paper sanding pads and continues to stay sharp during prolonged use. It has minimal clogging, is dustless when attached to the vacuum, and suitable for sanding on a variety of surfaces. The Ceramic Mesh also has a tough tear resistance, easy alignment (no designated hole pattern) and a high grip hook & loop. Wallboard's Ceramic Super Mesh is set to impress. Features: Ceramic abrasive grain is self sharpening = stays sharper for longer Hundreds of holes= reduced clogging Ceramic Pads + quality vacuum = dustless sanding Sharper grains = faster material removal Reduced sanding pressure required for a quality finish Outlasts traditional paper faced sanding pads Easy alignment (no designated hole pattern) Creates less heat than traditional aluminium oxide abrasives Suitable for use on plasterboard, paint & wood surfaces Our most premium & economical sanding solution yet! Grit range from 80g-240g Available in 10 & 25 packs Also available in 150mm & 125mm disc size

Read more less

With new technology ceramic grain, the mesh pad lasts significantly longer than traditional paper sanding pads and continues to stay sharp during prolonged use. It has minimal clogging, is dustless when attached to the vacuum, and suitable for sanding on a variety of surfaces. The Ceramic Mesh also has a tough tear resistance, easy alignment (no designated hole pattern) and a high grip hook & loop. Wallboard's Ceramic Super Mesh is set to impress. Features: Ceramic abrasive grain is self sharpening = stays sharper for longer Hundreds of holes= reduced clogging Ceramic Pads + quality vacuum = dustless sanding Sharper grains = faster material removal Reduced sanding pressure required for a quality finish Outlasts traditional paper faced sanding pads Easy alignment (no designated hole pattern) Creates less heat than traditional aluminium oxide abrasives Suitable for use on plasterboard, paint & wood surfaces Our most premium & economical sanding solution yet! Grit range from 80g-240g Available in 10 & 25 packs

Read more less

Wallboards economical chisel point Staples suit most staple guns Features: Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun Available in 8mm & 10mm Also fits Rapid 14 & 34 staple guns or the Arrow Code T-50 and Code T-55 guns Available in 2000 pack quantity

Read more less

Wallboards economical chisel point Staples suit most staple guns Features: Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun Available in 8mm & 10mm sizes Also fits Rapid 14 & 34 staple guns or the Arrow Code T-50 and Code T-55 guns Available in 5000 pack quantity

Read more less

Wallboards economical chisel point Staples suit most staple guns Features: Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun Available in 8mm & 10mm Also fits Rapid 14 & 34 staple guns or the Arrow Code T-50 and Code T-55 guns Available in 2000 pack quantity

Read more less

Wallboards economical chisel point Staples suit most staple guns Features: Wallboard range of staples are designed to fit the Wallboard Professional Staple Gun Available in 8mm & 10mm sizes Also fits Rapid 14 & 34 staple guns or the Arrow Code T-50 and Code T-55 guns

Read more less

The V-4 Corner Tool is designed to bed joint tape into the internal angle and feather the edges out to 50mm. Features: Flexible Stainless steel design Feathers compound out to 50mm Comfortable contoured wooden handle Solid aluminum blade mounting

Read more less

The CornerDuo Sander(s) is a simple economical tool that seamlessly integrates with your power sanding routine. You will get both a pole sander head and a head sander in the box so you can do both floor to ceiling sanding and those little touch ups. Features: Sands the internal corner Super lightweight Easy to use Minimal drag design Adjust from 90° to 80° Finishes 3 way corners with ease Floor to ceiling sanding Hand sanding option for touch ups Uses CornerDuo sanding pads (CD-220-5)

Read more less

The CornerDuo Sanding Pads are meticulously crafted for use with the CornerDuo Sanders, offering a flawless corner sanding experience. These pads feature a cushioned design with a perfectly balanced 220 grit. Features: Designed to be used with the CornerDuo Sanders Flawless Corner Sanding Cushioned Pad 220 Optimal Grit

Read more less

Wallboards traditional 10 point Cornice Saw is ideal for cutting plaster cornice. Features: Designed for cutting ornamental cornice through a large mitre box 10 point hardened teeth Available with 550mm, 650mm or 800mm blade

Read more less

Wallboard's Detail Tools are quality tools designed for finer detail work. Features: All steel construction Ideal for cornice work Available in 12, 20 & 25mm

Read more less

Wallboard's hard wearing trade quality trowel range is designed to last. Curved blade for crowning plaster joints Carbon steel with alloy tang Comfortable rubber grip Robust design

Read more less

Flexible high carbon spring steel curved blade 200mm & 280mm sizes No exposed rivets for the smoothest blade finish Red plastic handle Banana shaped handle provides comfortable grip Australian made.

Read more less

Wallboard's hard wearing trade quality trowel range is designed to last. Curved blade for crowning plaster joints Stainless steel with alloy tang Comfortable rubber grip Robust design

Read more less

Wallboard's popular Sub Zero professional cutting blades in a handy 100 pack dispenser. Features: High carbon SK2 steel Sub Zero tempering Improved flexibility Increased lifespan

Read more less

Heavy duty hard wearing score and snap knife designed for cutting cement sheet. Features: Two carbide scoring edges Comfortable pipe style handle Robust metal design

Read more less

Wallboard's economical but efficient Mud Slinger Mixer fits most drills with a 10mm chuck Features: Hexagon shaped 760mm shaft with 100mm diameter head For use in drills with 10mm or larger chuck Electrostatic epoxy coating for corrosion resistance and easy cleaning

Read more less

The Wallboard Drywall Banjo Taper allows you to simultaneously apply joint tape and compound to flat joints. Features: Beds tape in one easy step Adjustable nylon side handle fits different hand sizes Holds up to 2.3kg of mud Takes 75m and 150m rolls of tape Stainless gears automatically grip and dispense tape onto surface Control knob allows you to get an accurate and consistent coating of mud under the tape

Read more less

Wallboard's trade quality plywood cornice box makes cutting 45º and 135º degree angles in most standard size cornice simple. Features: Made from construction grade plywood Dual cutting at 45º & 135º degrees Sides and base are both 20mm thick and glued together for added strength Steps in base accommodates 55mm, 75mm and 90mm cornice Cuts are not full depth to maintain strength while box is in transit

Read more less

The Edmaplac Mega Board Lifter is designed to lift plasterboard in every position: horizontal (ceiling installation), angled (raked ceiling installation) and vertical (wall installation). It has an innovative braking system with 2 handles (main brake + safety brake) to lower the panel quickly under control. The automatic operation for lifting thanks to power drill assistance and rack and pinion system will lift plasterboard with less effort than other panel lifters. Features: Lifts up to a height of 4.5m Max sheet size 1.2m x 6m Innovative dual braking system Power drill assistance for lifting Max load capacity of 80kg

Read more less

After a powerful work light that's lightweight and easy to transport around? Then Wallboard's Extendable Dual-Head Work Light is for you. Run off battery or plugged in, use indoors or outside. The dual heads are individually adjustable to help achieve the perfect lighting. It takes just seconds to set up and pack away. Features: Twin Head Adjustable in all directions 5000LM High, 1500LM Medium, 500lm Low Runs on 2300lm when charging cable is plugged in 7 Hours run time on low Day light and White Light Modes Battery Life Display Folds for easy transportation Built in carry handle Lock at any desired height 4.6kg Net Weight Rechargeable battery cord and adapter included Carry bag available (sold separately)

Read more less

This carry bag is ideal for protecting your Extendable Dual-Headed LED Work Light and makes it extremely easy to transport.

Read more less